AC Induction DC Brush DC
Brushless |
> |
Stand-alone and Fully Programmable
Operation |
> |
Powerful I/O Handling with Advanced PLC
Capabilities |
> |
Modifiable Servo Algorithms |
> |
Advanced "Search for Contact" Motion Mode for Pick
& Place Applications |
> |
Advanced Real-Time Position Event
Generator-PEG |
> |
Optional CAN Interface with CANopen
Protocol |
> |
Optional Resolver Feedback |
> |
Integrated Digital Drive with Advanced 20/40kHz PWM
Power bridge |
> |
Full Interactive Application Development
Suite |
> |
Comprehensive C, C++ and Visual Basic libraries for
DOS, Windows 3.x/95/98/NT and
Linux | |
The SB1391 Universal Motion Control
Module Motion
Controller with 1-5kW Digital Drive Offers Single-Axis Control for
AC Induction, DC Brush and DC Brushless Motors.
The SB1391 is a powerful combination of
an advanced programmable controller, an all-digital drive and a
power supply. (A separate backup input is provided for protecting
controller functions in power failures.)
The universal drive is
software configurable for the following motor types: AC induction,
DC brush and DC brushless (AC servo/synchronous) with sinusoidal
commutation. Three power levels are available: 5A (10A peak), 10A
(20A) and 15A (30A). Bus voltage range is 120-320VDC.
The SB1391 supports
encoder (+ Hall) or resolver (12-bit resolution) as primary
feedback. In addition to dedicated safety inputs, it has eight
isolated inputs, eight isolated outputs, an analog input and an
analog output.
SV’s control
modules are based on state-of-the- art, proprietary technology that
has proven itself in many demanding applications, such as
semiconductor assembly and testing, electronic assembly and
inspection, digital printing, medical imaging, and packaging.
Built-in capabilities simplify programming common applications, such
as advanced pick & place, master/slave and electronic gearing
and camming.
The modules can be
programmed to handle motion, time and I/O events. They can operate
stand-alone, without a PLC or a PC. RS-232/422/485 serial
communications is standard and CAN interface with CANopen protocol
is optional.
Windows tools are
provided for setting up and tuning the modules and for developing
application programs. Libraries for Microsoft C/C++, Borland C/C++
and Visual Basic are available for DOS, Windows 3.11/95/98/NT and
Linux. The libraries support multithreading in Windows
95/98/NT.
Every module is
manufactured under an ISO9001 certified quality management system,
meets stringent safety and EMC standards, and is CE
compliant. |